ATI call for editors

Call for Editorial Board Members

The publisher would like to invite you to submit your application to join the Editorial Board of the journal as an Editorial Advisory Board (AB) member. The support of an EAB member will certainly be crucial to the development, quality and success of the journal.

As AB member (general member or affiliated with a certain journal scope area(s)) you could assist in the following ways:
- submitting research material
- reviewing for the journal
- recommending external reviewers
- advising on matters of journal development
- encouraging article submissions to the journal from your affiliated circles
- providing occasional guest editorials or guest editing a special issue
- representing and promoting the journal at conferences

Serving as a member of the board is voluntary. The journal is mainly small-scale, free and open-access. We significantly differ from those printed and open-access journals requiring high submission fees and/or selling full-text articles to their readers. Selected invited or papers in limited special cases are published even free of charge. The journal is published and fully financed by the Prague Development Center and non-for-profit Innovation and Technology Management Academy (ITMA).
Affiliations to our journals, therefore, are not fee-based. However, members can benefit with special conditions for the academic publishing opportunities.

Motivated researchers should send their letter of interest to  bd@pradec.eu and/or  info@itma.cz .
We look forward to receiving your application.

Publishers:
Prague Development Center
Innovation and Technology Management Academy
https://academicpublishingplatforms.com/journal.php?journal=ATI
http://www.pradec.eu/

ATI call for reviewers

ATI call for reviewers

Call for reviewers

The high-quality peer-review process is necessary for establishing the reputation of every scientific journal. ATI invites experienced scholars and professionals specializing in various domains of natural science, technology, applied natural and social disciplines to collaborate as reviewers for our journal. 

The charge of reviewers is to evaluate the quality, relevance, and merit of submitted papers. Reviews must be as complete and detailed as possible and contain clear opinions about strengths, weaknesses, relevance, and importance to the field. Preferably, reviewers should consider themselves as mentors to the author(s) and comments should be specific and constructive and suggestions should be intended to enhance the manuscript.

Therefore, if you would like to share your professional opinion and have an impact on ATI development ATI call for reviewers form and send it to publications@pradec.eu.

Requirements

- Possess a doctoral degree in medical or related discipline;
- Be fluent in academic English;
- Hold an academic affiliation;
- Work effectively under tight deadlines.

What do we offer?

Reviewing is voluntary. However, reviewers’ names will be published on the ATI website and listed once a year in a printed volume. Additionally, we offer 50% discount for the reviewers' submissions to ATI.

ATI declaration of contribution

ATI declaration of contribution

To increase transparency we call authors to write correct affiliations and addresses and show the source of funding for their research when it is required by funding institutions. To agree with the authorship and avoid the conflicts we ask for the declaration of contribution from the corresponding author. To avoid extensive self-citation practice we ask authors to use correct and relevant referencing to own research works published earlier.  

The author who submits the manuscript for publication accepts the responsibility of notifying all co-authors of the manuscript being submitted. The corresponding author must fill in and sign the ATI declaration of contribution (in case there are two authors or more), which should be submitted together with the manuscript. 

ATI paper submission

ATI journal online submission form





Submission terms and conditions

The author and co-authors of the article strictly commit to the policy of editors by accepting these terms and conditions

  • Authors are responsible to read and accept fee (215 euro) payment obligations of the targeted journal. The website has clear information about publication fees and payment terms. When paper accepted and published the author is obliged to fulfill his/ her fee payment obligations in the shortest time after the invoice issued.
  • The primary version of the journal is the online version. Therefore, we do not send a printed copy to the author(s) of the published article. Publisher does not make profits via subscription or sales of print copies. The publisher offers the full content for free access to the public and without restrictions. 
  • All rules and requirements relevant to the chosen type of submission are read and understood. Sending submission means accepted by the author/submitter all responsibility related to editorial and publishing conditions.
  • Submission technical requirements are read and accepted in designing and preparing the research paper
  • Please note that scientific editing might change the format and correct the writing to make it conventional with editorial policy.
  • Responsibility for facts and opinions presented in the contents of journals, electronic and/or printed rests exclusively with the authors, other submitters if there is relevance. Their interpretations do not necessarily reflect the views of publisher or editors, affiliated or partnering with journals and with authors institutions.
  • F.A.Q. must be visited if there is an additional reason in clarifying editorial policy. The editors can contact editors via email when it is accepted
  • Neither the publisher nor the editors can be held responsible for errors or any consequences arising from the use of information contained in this journal.
  • Rejected manuscripts will not be returned to the author.
  • The submitted article after evaluation can be published in elaborating/projecting online issues which differ ahead/or back from the submission date up to 3 consequent issues or 6 months interval. 
  • The version of an article which is published online is considered the final and complete version. Even though it is possible to correct this version, our policy (in common with other publishers) is not to do so, except in very limited circumstances. When an author wishes to update the published paper it can be possible within 4 weeks after publication. 
  • Article after the publication is not subject to removal, except for the sole discretion of the publisher. When editors screen, review and publish the article online or/end in print the article cannot be withdrawn until the decision of editors and publisher. The published articles go immediately to indexing archives and DOI depositories. 
  • Full rights for the removal of the publication of the article remain to the publisher. Retraction or removal of published article can arise in very rear and exceptional circumstances. Usually, it takes a long time to make a deeper analysis, examination of reasons and negotiations.
  • After receiving of the article editors and publisher usually publish immediately online the metadata. After screening and reviewing the full article can be published. The time length between submission and publication of metadata and the full article can be different and make hours, days or months. All this process is usually related to merits, quality of the paper, internal editorial processes, other factors. When necessary, the editors can issue proof of acceptance to the applied author.
  • The author is responsible for avoiding multiple submissions of the same article to other journals. PRADEC editors can charge authors for additional fees when it will be found that similar article was published in parallel. We can contact and inform the relevant journals about multiple practice of the author. When there are signs and suspicions about duplicate submission behaviour of the authors the publisher monitors periodically online during 12 weeks.
  • Website content, information, or terms and conditions may be revised without formal notice. We cannot guarantee that this website will be updated on a regular basis or otherwise provide the most current or accurate information that may be available.
  • No part of the material protected by this copyright notice may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without written permission from the copyright owner.

ATI guide to authors

Guide to authors

Sample article template

  • Please read the following guidelines and use the ATI article submission format for submission of your paper since only articles formatted accordingly may be accepted. This sample template can help you  avoid mistakes in formatting process of your original article. Do not send us articles in other formats (e.g., pdfs). Improper formatted articles will not be considered for screening and review process. We made this basic template to save your time in reading detailed instruction and guidance.

Screening, editorial analysis and peer-review procedures

  • All articles submitted to ATI undergo screening and followed with a peer-reviewing  process.
  • The corresponding author should send the formatted article and necessary attachments through the Online submission form.
  • The author who submits the manuscript for publication accepts the responsibility of notifying all co-authors of the manuscript being submitted. The corresponding author must fill in and sign the ATI declaration of contribution (in case there are two authors or more), which should be submitted together with the manuscript.
  • After initial screening, the titles and abstracts of the articles, which receive positive evaluation, will be published online.
  • Every article proceeds double-blind peer-review analysis by editorial and external experts. The submitted paper is reviewed by at least two independent reviewers (outside of the authors' affiliated entity). The reviews are in written form and contain a clear referees' statements concerning paper's publishing approval or its rejection. Reviewers should evaluate the quality of an article based both on established criteria and own views of experts. A reviewer is expected to fill the review form and send to the editorial department.

Quality control

  • Papers accepted undergo quality control by Editorial board and peer reviewers. All research articles in these journals undergo peer review process, based on initial editor screening and anonymous expertise of reviewers. Articles previously published, those under consideration by another journal, and those with a pre-existing copyright may not be submitted. An author must ensure that about half of the paper contents or core idea has not been published anywhere else.  In other words, authors should prove the considerable adjustment made and value added in their submissions.

Language

  • Articles must be written in English.

Title

  • Concise and informative. Avoid abbreviations.

Author names and affiliations

  • Full names should be provided. Please indicate affiliations of the author. Indicate the authors' affiliation addresses below the names. Indicate all affiliations with a lower-case superscript letter immediately after the Author's name and in front of the appropriate address.

Contacts

  • Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.

Abstract

  • A concise abstract should briefly state the purpose of the research and the main results. An abstract must be presented in English and separate from the article, so it must be able to stand alone.

Graphs (figures or charts)

  • Graphics should be done in MS Word/Excel and must be editable. Do not put "uneditable" figures/charts/tables made as photos/images of originally derived charts or tables. Use "Arial Narrow" font for constructing charts.

Tables

  • Tables should be numbered consecutively in the text in Arabic numerals and printed on separate sheets. Any manuscript which does not conform to the above instructions may be returned for the necessary revision before publication.

Footnotes

  • The use of footnotes should be kept to a minimum and numbered consecutively throughout the text with superscript Arabic numerals.

References

  • References to publications should be as follows: “Nelson (1992) noted that...” or “This problem has been studied previously (e.g., Smith et al., 1969)”.
  • The author should make sure that there is a strict one-to-one correspondence between the names and years in the text and those on the list. The list of references should appear at the end of the main text. It should be double-spaced and listed in alphabetical order by author's name.
  • Examples for monographs what references have to look like:
    • MILTA, 2010. Lithuanian Innovation Strategy for the Year 2010-2020. Agency for Science.
    • Eurostat, 2051. European Commission, Eurostat.
    • CREST, 2007. OMC Policy Mix Review Report, Country Report. Lithuania. June 2007. EU, Coordinating the Research Framework Programme and the Structural Funds to support Research and Development.
    • Revuelta F.I., Esnaola G. (Eds.), 2013. Videojuegos en redes sociales. Perspectivas del edutaiment y la pedagogía lúdica en el aula. Barcelona: Laertes.
  • For contributions to collective works
    • Dillenbourg P., Järvelä S., Fischer, F., 2009. "The evolution of research on computer-supported collaborative learning: From design to orchestration", In: Balacheff N., Ludvigsen S., de Jong T. et al. (Eds.), Technology-Enhanced Learning. Principles and products, pp.3-19.
  • For journals
    • Büyüközkan G., Çifçi G., Güleryüz S., 2011. "Strategic analysis of healthcare service quality using fuzzy AHP methodology", Journal of Expert Systems with Applications, Vol.38(8), pp.9407-9424
    • Chatti M.A., Agustiawan M.R., Jarke M., Specht M., 2010. "Toward a personal learning environment framework", International Journal of Virtual and Personal Learning Environments, Vol.1(4), pp.66-85
    • Chen M.K. and Wang S., 2010. "The critical factors of success for information service industry in developing international market: Using analytic hierarchy process (AHP) approach", Journal of Expert Systems with Applications, Vol.37, No.1, pp.694-704
  • For bulletins
    • ECB, 2004., “Labor productivity developments in the euro area: Aggregate trends and sectoral patterns”, ECB Monthly Bulletin, July.

Submission fee payment

  • Standard submission & service fee is - 160 Euro (plus VAT, when applicable).
  • The fee is due to pay only after receiving the positive review and formal acceptance letter from the editor.
  • The fee provides compensation for a range services related to expertise, scientific and technical editing, printing, electronic storing and web-managing. All papers are printed online (with corresponding online ISSN) and in print form (with corresponding Print ISSN).
  • The major  version of ATI publication is online (electronic) with eISSN 1804-4999
  • The fee is not a subject to guarantee the sending printed copy via standard airmail.

Payments options

  • You will receive an invoice with several payment methods you can choose after the letter of acceptance.

Important

  • Payments must be done only after the final letter of acceptance of a paper for publication.

Electronic submission

BEH call for editors

Call for Editorial Board Members

The publisher would like to invite you to submit your application to join the Editorial Board of the journal as an Editorial Advisory Board (AB) member. The support of an EAB member will certainly be crucial to the development, quality, and success of the journal.

As AB member (general member or affiliated with a certain journal scope area(s)) you could assist in the following ways:
- submitting research material
- reviewing for the journal
- recommending external reviewers 
- advising on matters of journal development
- encouraging article submissions to the journal from your affiliated circles 
- providing occasional guest editorials or guest editing a special issue
- representing and promoting the journal at conferences

Serving as a member of the board is voluntary. The journal is mainly small-scale, free and open-access. We significantly differ from those printed and open-access journals requiring high submission fees and/or selling full-text articles to their readers. Selected invited or papers in limited special cases are published even free of charge. The journal is published and fully financed by the Prague Development Center and non-for-profit Innovation and Technology Management Academy (ITMA).
Affiliations to our journals, therefore, are not fee-based. However, members can benefit with special conditions for the academic publishing opportunities.

Motivated researchers should send their letter of interest to  bd@pradec.eu and/or  info@itma.cz . 
We look forward to receiving your application.

Publishers:
Prague Development Center
Innovation and Technology Management Academy
https://academicpublishingplatforms.com/journal.php?journal=BEH
http://www.pradec.eu/

PIEB call for editors

Call for Editorial Board Members

The publisher would like to invite you to submit your application to join the Editorial Board of the journal as an Editorial Advisory Board (AB) member. The support of an EAB member will certainly be crucial to the development, quality, and success of the journal.

As AB member (general member or affiliated with a certain journal scope area(s)) you could assist in the following ways:
– submitting research material
– reviewing for the journal
– recommending external reviewers
– advising on matters of journal development
– encouraging article submissions to the journal from your affiliated circles
– providing occasional guest editorials or guest editing a special issue
– representing and promoting the journal at conferences

Serving as a member of the board is voluntary. The journal is mainly small-scale, free and open-access. We significantly differ from those printed and open-access journals requiring high submission fees and/or selling full-text articles to their readers. Selected invited or papers in limited special cases are published even free of charge. The journal is published and fully financed by the Prague Development Center and non-for-profit Innovation and Technology Management Academy (ITMA).
Affiliations to our journals, therefore, are not fee-based. However, members can benefit with special conditions for the academic publishing opportunities.

Motivated researchers should send their letter of interest to  bd@pradec.eu and/or  info@itma.cz .
We look forward to receiving your application.

Publishers:
Prague Development Center
Innovation and Technology Management Academy
https://academicpublishingplatforms.com/journal.php?journal=PIEB
http://pieb.pradec.eu/

PIEB declaration of contribution

PIEB declaration of contribution

The author who submits the manuscript for publication accepts the responsibility of notifying all co-authors of the manuscript being submitted. The corresponding author must fill in and sign the PIEB declaration of contribution (in case there are two authors or more), which should be submitted together with the manuscript.

PIEB paper submission

PIEB journal online submission form





Submission terms and conditions

The author and co-authors of the article strictly commit to the policy of editors by accepting these terms and conditions

  • Authors are responsible to read and accept fee (215 euro) payment obligations of the targeted journal. The website has clear information about publication fees and payment terms. When paper accepted and published the author is obliged to fulfill his/ her fee payment obligations in the shortest time after the invoice issued.
  • The primary version of the journal is the online version. Therefore, we do not send a printed copy to the author(s) of the published article. Publisher does not make profits via subscription or sales of print copies. The publisher offers the full content for free access to the public and without restrictions. 
  • All rules and requirements relevant to the chosen type of submission are read and understood. Sending submission means accepted by the author/submitter all responsibility related to editorial and publishing conditions.
  • Submission technical requirements are read and accepted in designing and preparing the research paper
  • Please note that scientific editing might change the format and correct the writing to make it conventional with editorial policy.
  • Responsibility for facts and opinions presented in the contents of journals, electronic and/or printed rests exclusively with the authors, other submitters if there is relevance. Their interpretations do not necessarily reflect the views of publisher or editors, affiliated or partnering with journals and with authors institutions.
  • F.A.Q. must be visited if there is an additional reason in clarifying editorial policy. The editors can contact editors via email when it is accepted
  • Neither the publisher nor the editors can be held responsible for errors or any consequences arising from the use of information contained in this journal.
  • Rejected manuscripts will not be returned to the author.
  • The submitted article after evaluation can be published in elaborating/projecting online issues which differ ahead/or back from the submission date up to 3 consequent issues or 6 months interval. 
  • The version of an article which is published online is considered the final and complete version. Even though it is possible to correct this version, our policy (in common with other publishers) is not to do so, except in very limited circumstances. When an author wishes to update the published paper it can be possible within 4 weeks after publication. 
  • Article after the publication is not subject to removal, except for the sole discretion of the publisher. When editors screen, review and publish the article online or/end in print the article cannot be withdrawn until the decision of editors and publisher. The published articles go immediately to indexing archives and DOI depositories. 
  • Full rights for the removal of the publication of the article remain to the publisher. Retraction or removal of published article can arise in very rear and exceptional circumstances. Usually, it takes a long time to make a deeper analysis, examination of reasons and negotiations.
  • After receiving of the article editors and publisher usually publish immediately online the metadata. After screening and reviewing the full article can be published. The time length between submission and publication of metadata and the full article can be different and make hours, days or months. All this process is usually related to merits, quality of the paper, internal editorial processes, other factors. When necessary, the editors can issue proof of acceptance to the applied author.
  • The author is responsible for avoiding multiple submissions of the same article to other journals. PRADEC editors can charge authors for additional fees when it will be found that similar article was published in parallel. We can contact and inform the relevant journals about multiple practice of the author. When there are signs and suspicions about duplicate submission behaviour of the authors the publisher monitors periodically online during 12 weeks.
  • Website content, information, or terms and conditions may be revised without formal notice. We cannot guarantee that this website will be updated on a regular basis or otherwise provide the most current or accurate information that may be available.
  • No part of the material protected by this copyright notice may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without written permission from the copyright owner.